Getter 및 Setter 메소드는 Java 프로그래밍에서 자주 사용됩니다. Java의 Getter 및 Setter 메소드 클래스 필드의 값에 액세스하고 조작하는 데 널리 사용됩니다. 일반적으로 클래스 필드는 개인 액세스 지정자로 장식됩니다. 따라서 이에 액세스하기 위해 getter 및 setter 메서드와 함께 공용 액세스 지정자를 사용합니다.
Getter 및 Setter 메서드의 필요성
클래스 필드를 공개로 선언하고 getter 및 setter 메소드를 제거해야 한다고 주장할 수도 있습니다. 그러나 이러한 코딩 스타일은 좋지 않으며 클래스 필드에 터무니없는 값을 부여할 수도 있습니다. 예를 들어 이해해 봅시다.
public class GetterSetterExample { public salary; public storeSalaryDB(int salary) { // code for storing the salary in the database } // main method public static void main(String argvs[]) { GetterSetterExample obj = new GetterSetterExample(); obj.salary = -50000; // storing salary in database obj.storeSalaryDB(salary); } } 코드가 잘못된 데이터베이스에 음수 급여를 저장하고 있음을 관찰하십시오. 조직은 결코 직원의 계좌에 마이너스 급여를 적립하지 않습니다. 급여 변수에 터무니없는 금액을 할당한 것은 공용 접근 지정자로 선언되었기 때문입니다. 위 코드를 작성하는 올바른 방법은 다음과 같습니다.
public class GetterSetterExample { private salary; // a setter method that assign a // value to the salary variable void setSalary(int s) { if(s <0 ) { s="-s;" } this.salary="s;" a getter mehtod to retrieve the salary int getsalary() return this.salary; public storesalarydb(int salary) code for storing in database system.out.println('the ') main method static void main(string argvs[]) creating an object of class gettersetterexample obj="new" gettersetterexample(); obj.setsalary(-50000); obj.storesalarydb(salary); < pre> <p>Now, we can see better control over what we send to the database to store. Whenever the salary is negative, we are converting the salary into a positive value, and then we are sending it to the database to store. Thus, no matter what value we send to the setter method, the if-block of the setter method takes care of the absurd value and thus gives better control on the salary value.</p> <h2>Getter Setter Java Program</h2> <p> <strong>FileName:</strong> GetterSetterExample1.java</p> <pre> class Employee { // class member variable private int eId; private String eName; private String eDesignation; private String eCompany; public int getEmpId() { return eId; } public void setEmpId(final int eId) { this.eId = eId; } public String getEmpName() { return eName; } public void setEmpName(final String eName) { // Validating the employee's name and // throwing an exception if the name is null or its length is less than or equal to 0. if(eName == null || eName.length() <= 0) { throw new illegalargumentexception(); } this.ename="eName;" public string getempdesignation() return edesignation; void setempdesignation(final edesignation) this.edesignation="eDesignation;" getempcompany() ecompany; setempcompany(final ecompany) this.ecompany="eCompany;" for printing the values @override tostring() str="Employee: [id = " + getempid() ', name=" + getEmpName() + " , designation=" + getEmpDesignation() + " company=" + getEmpCompany() + " ]'; str; main class. class gettersetterexample1 method static main(string argvs[]) creating an object of employee final emp="new" employee(); details are getting set using setter methods. emp.setempid(107); emp.setempname('kathy'); emp.setempdesignation('software tester'); emp.setempcompany('xyz corporation'); displaying 'tostring()' method, which uses getter methods system.out.println(emp.tostring()); < pre> <p> <strong>Output:</strong> </p> <pre> Employee: [id = 107, name = Kathy, designation = Software Tester, company = XYZ Corporation] </pre> <h2>Bad Practices in Getter and Setter Methods</h2> <p>There are some common bad practices that people usually do when they deal with the getter and setter methods.</p> <h3>Bad Practice 1:</h3> <p>Using getter and setter for the variable that is declared with low restricted scope.</p> <pre> public salary; void setSalary(int s) { salary = s; } int getSalary() { return salary; } </pre> <p>It is evident that from the main method, one can directly access the variable salary, which is not only bad but also makes the presence of the getter and setter methods irrelevant.</p> <h3>Bad Practice 2:</h3> <p>Using an object reference in the setter method. Consider the following program.</p> <p> <strong>FileName:</strong> GetterSetterExample2.java</p> <pre> class ABC { private int[] val; void setVal(int[] arr) { this.val = arr; // line 7 } // for displaying the value // present in the val array void display() { int size = (this.val).length; for(int i = 0; i <size; i++) { system.out.print(this.val[i] + ' '); } main class public gettersetterexample2 method static void main(string argvs[]) instantiating the abc obj="new" abc(); int mainarr[]="{3," 4, 6, 8, 78, 9}; invoking setter obj.setval(mainarr); display obj.display(); updating value at 0th index mainarr[0]="-1;" system.out.println(); < pre> <p> <strong>Output:</strong> </p> <pre> 3 4 6 8 78 9 -1 4 6 8 78 9 </pre> <p> <strong>Explanation:</strong> </p> <p>References are a bit tricky to deal with! In the above code, at line 43, the value got updated at the 0th index for array mainArr[]. However, it also got reflected in the array val[]. It should not happen as val[] array is declared private; hence, it is expected that any code outside of the class ABC should not modify it. However, because of the references, everything is messed up. The setter method setVal() expecting a reference of an int array, and at line 7, the reference of the int arr[] is getting copied to val[]. Note that the reference variable arr[] is storing the reference of the array mainArr[]. Thus, we can say val[] is storing the reference of the mainArr[].</p> <p>Therefore, whatever we change in the mainArr[] also gets reflected in the val[] array, which violates the purpose of the setter method. Also, there is no meaning in adding the private access specifier to the val[] array; because one can change the value of the val[] array in the main method, which is evident by looking at the output.</p> <p>A better way of writing the above code is:</p> <p> <strong>FileName:</strong> GetterSetterExample3.java</p> <pre> class ABC { private int[] val; void setVal(int[] arr) { int size = arr.length; // allocating the memory as // per the array arr size val = new int[size]; // line 11 for(int i = 0; i <size; 17 53 i++) { copying the value one by into val array this.val[i]="arr[i];" line } for displaying present in void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + ' '); main class. public class gettersetterexample3 method static main(string argvs[]) instantiating abc obj="new" abc(); mainarr[]="{3," 4, 6, 8, 78, 9}; invoking setter obj.setval(mainarr); display obj.display(); updating at 0th index mainarr[0]="-1;" system.out.println(); again pre> <p> <strong>Output:</strong> </p> <pre> 3 4 6 8 78 9 3 4 6 8 78 9 </pre> <p> <strong>Explanation:</strong> </p> <p>In the above code, we are doing the deep copy of elements of the array arr[]. In line 11, we are creating an entirely new array. Thus, the val[] is not referring to the arr[]. Also, in line 17, only values of the element are getting copied. Therefore, when we change the value of the 0th element at line 53, the change is not reflected in the val[]. Thus, the above code respects the encapsulation of the private member variable val[].</p> <h3>Bad Practice 3:</h3> <p>Returning an object reference in the getter method. Observe the following program.</p> <p> <strong>FileName:</strong> GetterSetterExample4.java</p> <pre> class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { // returning the reference return val; // line 9 } // for displaying the value // present in the val array void display() { int size = (this.val).length; for(int i = 0; i <size; 42 i++) { system.out.print(this.val[i] + ' '); } main class. public class gettersetterexample4 method static void main(string argvs[]) instantiating the abc obj="new" abc(); invoking getter and storing result int arr[]="obj.getVal();" display obj.display(); updating value at 0th index arr[0]="-1;" line system.out.println(); again < pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 -1 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> </p> <p>The above code is not handling the references properly. The getter method is returning the reference of the array. The arr[] is storing the reference of the array val[], which is declared private in the class ABC. Because of exposing the reference to the outer world, arr[] can manipulate the val[], and thus, the encapsulation of the class ABC is breached. The proper way to handle the above is:</p> <p> <strong>FileName:</strong> GetterSetterExample5.java</p> <pre> class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { int size = val.length; // creating a new array int temp[] = new int[size]; // copying the content of the array to temp array for(int i = 0; i <size; 54 i++) { temp[i]="val[i];" } return temp; for displaying the value present in val array void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + ' '); main class. public class gettersetterexample5 method static main(string argvs[]) instantiating abc obj="new" abc(); invoking getter and storing result arr[]="obj.getVal();" display obj.display(); updating at 0th index arr[0]="-1;" line system.out.println(); pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 67 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> In the above code, the reference of the private array is not sent to the outside world. In the getter method, a new array is created whose reference is sent to the main method. Therefore, when the value at the 0th index gets changed at line 54, that change impacts the temp[] array, not the private array val[]. Thus, the encapsulation of the class ABC is maintained, as the reference of the array val[] is not exposed to the outside world.</p> <h4>Note 1: For primitive data types (int, char, etc.), one does not need to create a copy in the getter and setter methods, as the concept of references is absent for the primitive data types.</h4> <h4>Note 2: Strings object types also work on the references. However, unlike the above examples, one does not need to take care of the String references exposed to the outside world. It is because Strings are immutable. Thus, when one manipulates the string in the main method (or anywhere else), a new String object is created, and the previous one remains untouched.</h4> <p> <strong>FileName:</strong> GetterSetterExample6.java</p> <pre> class ABC { private String str = null; // a setter method void setVal(String s) { // reference is getting copied this.str = s; } // for displaying the string void display() { System.out.println( 'The String is: ' + this.str); } } // Main class. public class GetterSetterExample6 { // main method public static void main(String argvs[]) { // creating an object of the class ABC ABC obj = new ABC(); // input string String inputStr = 'Hello India!'; // invoking the setter method obj.setVal(inputStr); obj.display(); // manipulation is not allowed! // it leads to the creation of the new string inputStr = 'Hello World!'; obj.display(); } } </pre> <p> <strong>Output:</strong> </p> <pre> The String is: Hello India! The String is: Hello India! </pre> <hr></size;></pre></size;></pre></size;></pre></size;></pre></=></pre></0> Getter 및 Setter 메서드의 나쁜 관행
사람들이 getter 및 setter 메서드를 다룰 때 일반적으로 저지르는 몇 가지 일반적인 나쁜 관행이 있습니다.
나쁜 습관 1:
제한된 범위로 선언된 변수에 대해 getter 및 setter를 사용합니다.
100만은 0이 몇 개야?
public salary; void setSalary(int s) { salary = s; } int getSalary() { return salary; } 주요 메소드에서 변수 급여에 직접 액세스할 수 있다는 것은 분명합니다. 이는 나쁠 뿐만 아니라 getter 및 setter 메소드의 존재를 부적절하게 만듭니다.
나쁜 습관 2:
setter 메소드에서 객체 참조를 사용합니다. 다음 프로그램을 고려해보세요.
파일 이름: GetterSetterExample2.java
변경 열 추가 오라클
class ABC { private int[] val; void setVal(int[] arr) { this.val = arr; // line 7 } // for displaying the value // present in the val array void display() { int size = (this.val).length; for(int i = 0; i <size; i++) { system.out.print(this.val[i] + \' \'); } main class public gettersetterexample2 method static void main(string argvs[]) instantiating the abc obj="new" abc(); int mainarr[]="{3," 4, 6, 8, 78, 9}; invoking setter obj.setval(mainarr); display obj.display(); updating value at 0th index mainarr[0]="-1;" system.out.println(); < pre> <p> <strong>Output:</strong> </p> <pre> 3 4 6 8 78 9 -1 4 6 8 78 9 </pre> <p> <strong>Explanation:</strong> </p> <p>References are a bit tricky to deal with! In the above code, at line 43, the value got updated at the 0th index for array mainArr[]. However, it also got reflected in the array val[]. It should not happen as val[] array is declared private; hence, it is expected that any code outside of the class ABC should not modify it. However, because of the references, everything is messed up. The setter method setVal() expecting a reference of an int array, and at line 7, the reference of the int arr[] is getting copied to val[]. Note that the reference variable arr[] is storing the reference of the array mainArr[]. Thus, we can say val[] is storing the reference of the mainArr[].</p> <p>Therefore, whatever we change in the mainArr[] also gets reflected in the val[] array, which violates the purpose of the setter method. Also, there is no meaning in adding the private access specifier to the val[] array; because one can change the value of the val[] array in the main method, which is evident by looking at the output.</p> <p>A better way of writing the above code is:</p> <p> <strong>FileName:</strong> GetterSetterExample3.java</p> <pre> class ABC { private int[] val; void setVal(int[] arr) { int size = arr.length; // allocating the memory as // per the array arr size val = new int[size]; // line 11 for(int i = 0; i <size; 17 53 i++) { copying the value one by into val array this.val[i]="arr[i];" line } for displaying present in void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + \' \'); main class. public class gettersetterexample3 method static main(string argvs[]) instantiating abc obj="new" abc(); mainarr[]="{3," 4, 6, 8, 78, 9}; invoking setter obj.setval(mainarr); display obj.display(); updating at 0th index mainarr[0]="-1;" system.out.println(); again pre> <p> <strong>Output:</strong> </p> <pre> 3 4 6 8 78 9 3 4 6 8 78 9 </pre> <p> <strong>Explanation:</strong> </p> <p>In the above code, we are doing the deep copy of elements of the array arr[]. In line 11, we are creating an entirely new array. Thus, the val[] is not referring to the arr[]. Also, in line 17, only values of the element are getting copied. Therefore, when we change the value of the 0th element at line 53, the change is not reflected in the val[]. Thus, the above code respects the encapsulation of the private member variable val[].</p> <h3>Bad Practice 3:</h3> <p>Returning an object reference in the getter method. Observe the following program.</p> <p> <strong>FileName:</strong> GetterSetterExample4.java</p> <pre> class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { // returning the reference return val; // line 9 } // for displaying the value // present in the val array void display() { int size = (this.val).length; for(int i = 0; i <size; 42 i++) { system.out.print(this.val[i] + \' \'); } main class. public class gettersetterexample4 method static void main(string argvs[]) instantiating the abc obj="new" abc(); invoking getter and storing result int arr[]="obj.getVal();" display obj.display(); updating value at 0th index arr[0]="-1;" line system.out.println(); again < pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 -1 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> </p> <p>The above code is not handling the references properly. The getter method is returning the reference of the array. The arr[] is storing the reference of the array val[], which is declared private in the class ABC. Because of exposing the reference to the outer world, arr[] can manipulate the val[], and thus, the encapsulation of the class ABC is breached. The proper way to handle the above is:</p> <p> <strong>FileName:</strong> GetterSetterExample5.java</p> <pre> class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { int size = val.length; // creating a new array int temp[] = new int[size]; // copying the content of the array to temp array for(int i = 0; i <size; 54 i++) { temp[i]="val[i];" } return temp; for displaying the value present in val array void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + \' \'); main class. public class gettersetterexample5 method static main(string argvs[]) instantiating abc obj="new" abc(); invoking getter and storing result arr[]="obj.getVal();" display obj.display(); updating at 0th index arr[0]="-1;" line system.out.println(); pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 67 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> In the above code, the reference of the private array is not sent to the outside world. In the getter method, a new array is created whose reference is sent to the main method. Therefore, when the value at the 0th index gets changed at line 54, that change impacts the temp[] array, not the private array val[]. Thus, the encapsulation of the class ABC is maintained, as the reference of the array val[] is not exposed to the outside world.</p> <h4>Note 1: For primitive data types (int, char, etc.), one does not need to create a copy in the getter and setter methods, as the concept of references is absent for the primitive data types.</h4> <h4>Note 2: Strings object types also work on the references. However, unlike the above examples, one does not need to take care of the String references exposed to the outside world. It is because Strings are immutable. Thus, when one manipulates the string in the main method (or anywhere else), a new String object is created, and the previous one remains untouched.</h4> <p> <strong>FileName:</strong> GetterSetterExample6.java</p> <pre> class ABC { private String str = null; // a setter method void setVal(String s) { // reference is getting copied this.str = s; } // for displaying the string void display() { System.out.println( 'The String is: ' + this.str); } } // Main class. public class GetterSetterExample6 { // main method public static void main(String argvs[]) { // creating an object of the class ABC ABC obj = new ABC(); // input string String inputStr = 'Hello India!'; // invoking the setter method obj.setVal(inputStr); obj.display(); // manipulation is not allowed! // it leads to the creation of the new string inputStr = 'Hello World!'; obj.display(); } } </pre> <p> <strong>Output:</strong> </p> <pre> The String is: Hello India! The String is: Hello India! </pre> <hr></size;></pre></size;></pre></size;></pre></size;> 설명:
참고문헌은 다루기가 조금 까다롭습니다! 위 코드의 43번째 줄에서 mainArr[] 배열의 0번째 인덱스에서 값이 업데이트되었습니다. 그러나 이는 val[] 배열에도 반영되었습니다. val[] 배열이 비공개로 선언되었으므로 이런 일이 발생해서는 안 됩니다. 따라서 ABC 클래스 외부의 코드는 이를 수정해서는 안 됩니다. 그러나 참조로 인해 모든 것이 엉망이 됩니다. int 배열의 참조를 기대하는 setter 메서드 setVal()과 7행에서 int arr[]의 참조가 val[]에 복사됩니다. 참조 변수 arr[]는 mainArr[] 배열의 참조를 저장하고 있습니다. 따라서 val[]이 mainArr[]의 참조를 저장하고 있다고 말할 수 있습니다.
따라서 mainArr[]에서 변경한 내용은 val[] 배열에도 반영되며 이는 setter 메서드의 목적을 위반합니다. 또한 val[] 배열에 개인 액세스 지정자를 추가하는 것은 의미가 없습니다. 왜냐하면 main 메소드에서 val[] 배열의 값을 변경할 수 있기 때문입니다. 이는 출력을 보면 알 수 있습니다.
위의 코드를 작성하는 더 좋은 방법은 다음과 같습니다.
파일 이름: GetterSetterExample3.java
class ABC { private int[] val; void setVal(int[] arr) { int size = arr.length; // allocating the memory as // per the array arr size val = new int[size]; // line 11 for(int i = 0; i <size; 17 53 i++) { copying the value one by into val array this.val[i]="arr[i];" line } for displaying present in void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + \' \'); main class. public class gettersetterexample3 method static main(string argvs[]) instantiating abc obj="new" abc(); mainarr[]="{3," 4, 6, 8, 78, 9}; invoking setter obj.setval(mainarr); display obj.display(); updating at 0th index mainarr[0]="-1;" system.out.println(); again pre> <p> <strong>Output:</strong> </p> <pre> 3 4 6 8 78 9 3 4 6 8 78 9 </pre> <p> <strong>Explanation:</strong> </p> <p>In the above code, we are doing the deep copy of elements of the array arr[]. In line 11, we are creating an entirely new array. Thus, the val[] is not referring to the arr[]. Also, in line 17, only values of the element are getting copied. Therefore, when we change the value of the 0th element at line 53, the change is not reflected in the val[]. Thus, the above code respects the encapsulation of the private member variable val[].</p> <h3>Bad Practice 3:</h3> <p>Returning an object reference in the getter method. Observe the following program.</p> <p> <strong>FileName:</strong> GetterSetterExample4.java</p> <pre> class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { // returning the reference return val; // line 9 } // for displaying the value // present in the val array void display() { int size = (this.val).length; for(int i = 0; i <size; 42 i++) { system.out.print(this.val[i] + \' \'); } main class. public class gettersetterexample4 method static void main(string argvs[]) instantiating the abc obj="new" abc(); invoking getter and storing result int arr[]="obj.getVal();" display obj.display(); updating value at 0th index arr[0]="-1;" line system.out.println(); again < pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 -1 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> </p> <p>The above code is not handling the references properly. The getter method is returning the reference of the array. The arr[] is storing the reference of the array val[], which is declared private in the class ABC. Because of exposing the reference to the outer world, arr[] can manipulate the val[], and thus, the encapsulation of the class ABC is breached. The proper way to handle the above is:</p> <p> <strong>FileName:</strong> GetterSetterExample5.java</p> <pre> class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { int size = val.length; // creating a new array int temp[] = new int[size]; // copying the content of the array to temp array for(int i = 0; i <size; 54 i++) { temp[i]="val[i];" } return temp; for displaying the value present in val array void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + \' \'); main class. public class gettersetterexample5 method static main(string argvs[]) instantiating abc obj="new" abc(); invoking getter and storing result arr[]="obj.getVal();" display obj.display(); updating at 0th index arr[0]="-1;" line system.out.println(); pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 67 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> In the above code, the reference of the private array is not sent to the outside world. In the getter method, a new array is created whose reference is sent to the main method. Therefore, when the value at the 0th index gets changed at line 54, that change impacts the temp[] array, not the private array val[]. Thus, the encapsulation of the class ABC is maintained, as the reference of the array val[] is not exposed to the outside world.</p> <h4>Note 1: For primitive data types (int, char, etc.), one does not need to create a copy in the getter and setter methods, as the concept of references is absent for the primitive data types.</h4> <h4>Note 2: Strings object types also work on the references. However, unlike the above examples, one does not need to take care of the String references exposed to the outside world. It is because Strings are immutable. Thus, when one manipulates the string in the main method (or anywhere else), a new String object is created, and the previous one remains untouched.</h4> <p> <strong>FileName:</strong> GetterSetterExample6.java</p> <pre> class ABC { private String str = null; // a setter method void setVal(String s) { // reference is getting copied this.str = s; } // for displaying the string void display() { System.out.println( 'The String is: ' + this.str); } } // Main class. public class GetterSetterExample6 { // main method public static void main(String argvs[]) { // creating an object of the class ABC ABC obj = new ABC(); // input string String inputStr = 'Hello India!'; // invoking the setter method obj.setVal(inputStr); obj.display(); // manipulation is not allowed! // it leads to the creation of the new string inputStr = 'Hello World!'; obj.display(); } } </pre> <p> <strong>Output:</strong> </p> <pre> The String is: Hello India! The String is: Hello India! </pre> <hr></size;></pre></size;></pre></size;> 설명:
위 코드에서는 arr[] 배열 요소의 전체 복사를 수행하고 있습니다. 11번째 줄에서는 완전히 새로운 배열을 생성합니다. 따라서 val[]은 arr[]을 참조하지 않습니다. 또한 17행에서는 요소의 값만 복사됩니다. 따라서 53행에서 0번째 요소의 값을 변경해도 변경 내용이 val[]에 반영되지 않습니다. 따라서 위의 코드는 전용 멤버 변수 val[]의 캡슐화를 존중합니다.
나쁜 습관 3:
getter 메소드에서 객체 참조를 반환합니다. 다음 프로그램을 관찰하세요.
nat 대 침대
파일 이름: GetterSetterExample4.java
class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { // returning the reference return val; // line 9 } // for displaying the value // present in the val array void display() { int size = (this.val).length; for(int i = 0; i <size; 42 i++) { system.out.print(this.val[i] + \' \'); } main class. public class gettersetterexample4 method static void main(string argvs[]) instantiating the abc obj="new" abc(); invoking getter and storing result int arr[]="obj.getVal();" display obj.display(); updating value at 0th index arr[0]="-1;" line system.out.println(); again < pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 -1 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> </p> <p>The above code is not handling the references properly. The getter method is returning the reference of the array. The arr[] is storing the reference of the array val[], which is declared private in the class ABC. Because of exposing the reference to the outer world, arr[] can manipulate the val[], and thus, the encapsulation of the class ABC is breached. The proper way to handle the above is:</p> <p> <strong>FileName:</strong> GetterSetterExample5.java</p> <pre> class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { int size = val.length; // creating a new array int temp[] = new int[size]; // copying the content of the array to temp array for(int i = 0; i <size; 54 i++) { temp[i]="val[i];" } return temp; for displaying the value present in val array void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + \' \'); main class. public class gettersetterexample5 method static main(string argvs[]) instantiating abc obj="new" abc(); invoking getter and storing result arr[]="obj.getVal();" display obj.display(); updating at 0th index arr[0]="-1;" line system.out.println(); pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 67 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> In the above code, the reference of the private array is not sent to the outside world. In the getter method, a new array is created whose reference is sent to the main method. Therefore, when the value at the 0th index gets changed at line 54, that change impacts the temp[] array, not the private array val[]. Thus, the encapsulation of the class ABC is maintained, as the reference of the array val[] is not exposed to the outside world.</p> <h4>Note 1: For primitive data types (int, char, etc.), one does not need to create a copy in the getter and setter methods, as the concept of references is absent for the primitive data types.</h4> <h4>Note 2: Strings object types also work on the references. However, unlike the above examples, one does not need to take care of the String references exposed to the outside world. It is because Strings are immutable. Thus, when one manipulates the string in the main method (or anywhere else), a new String object is created, and the previous one remains untouched.</h4> <p> <strong>FileName:</strong> GetterSetterExample6.java</p> <pre> class ABC { private String str = null; // a setter method void setVal(String s) { // reference is getting copied this.str = s; } // for displaying the string void display() { System.out.println( 'The String is: ' + this.str); } } // Main class. public class GetterSetterExample6 { // main method public static void main(String argvs[]) { // creating an object of the class ABC ABC obj = new ABC(); // input string String inputStr = 'Hello India!'; // invoking the setter method obj.setVal(inputStr); obj.display(); // manipulation is not allowed! // it leads to the creation of the new string inputStr = 'Hello World!'; obj.display(); } } </pre> <p> <strong>Output:</strong> </p> <pre> The String is: Hello India! The String is: Hello India! </pre> <hr></size;></pre></size;> 설명:
위 코드는 참조를 제대로 처리하지 않습니다. getter 메소드는 배열의 참조를 반환합니다. arr[]은 ABC 클래스에서 비공개로 선언된 배열 val[]의 참조를 저장하고 있습니다. 참조를 외부 세계에 노출시키기 때문에 arr[]는 val[]을 조작할 수 있으므로 ABC 클래스의 캡슐화가 위반됩니다. 위의 내용을 처리하는 올바른 방법은 다음과 같습니다.
파일 이름: GetterSetterExample5.java
class ABC { private int[] val = {67, 43, 68, 112, 70, 12}; // the getter method public int[] getVal() { int size = val.length; // creating a new array int temp[] = new int[size]; // copying the content of the array to temp array for(int i = 0; i <size; 54 i++) { temp[i]="val[i];" } return temp; for displaying the value present in val array void display() int size="(this.val).length;" for(int i="0;" < size; system.out.print(this.val[i] + \\' \\'); main class. public class gettersetterexample5 method static main(string argvs[]) instantiating abc obj="new" abc(); invoking getter and storing result arr[]="obj.getVal();" display obj.display(); updating at 0th index arr[0]="-1;" line system.out.println(); pre> <p> <strong>Output:</strong> </p> <pre> 67 43 68 112 70 12 67 43 68 112 70 12 </pre> <p> <strong>Explanation:</strong> In the above code, the reference of the private array is not sent to the outside world. In the getter method, a new array is created whose reference is sent to the main method. Therefore, when the value at the 0th index gets changed at line 54, that change impacts the temp[] array, not the private array val[]. Thus, the encapsulation of the class ABC is maintained, as the reference of the array val[] is not exposed to the outside world.</p> <h4>Note 1: For primitive data types (int, char, etc.), one does not need to create a copy in the getter and setter methods, as the concept of references is absent for the primitive data types.</h4> <h4>Note 2: Strings object types also work on the references. However, unlike the above examples, one does not need to take care of the String references exposed to the outside world. It is because Strings are immutable. Thus, when one manipulates the string in the main method (or anywhere else), a new String object is created, and the previous one remains untouched.</h4> <p> <strong>FileName:</strong> GetterSetterExample6.java</p> <pre> class ABC { private String str = null; // a setter method void setVal(String s) { // reference is getting copied this.str = s; } // for displaying the string void display() { System.out.println( 'The String is: ' + this.str); } } // Main class. public class GetterSetterExample6 { // main method public static void main(String argvs[]) { // creating an object of the class ABC ABC obj = new ABC(); // input string String inputStr = 'Hello India!'; // invoking the setter method obj.setVal(inputStr); obj.display(); // manipulation is not allowed! // it leads to the creation of the new string inputStr = 'Hello World!'; obj.display(); } } </pre> <p> <strong>Output:</strong> </p> <pre> The String is: Hello India! The String is: Hello India! </pre> <hr></size;> 설명: 위 코드에서 개인 배열의 참조는 외부 세계로 전송되지 않습니다. getter 메소드에서는 참조가 기본 메소드로 전송되는 새 배열이 생성됩니다. 따라서 0번째 인덱스의 값이 54행에서 변경되면 해당 변경 사항은 개인 배열 val[]이 아닌 temp[] 배열에 영향을 미칩니다. 따라서 배열 val[]의 참조가 외부 세계에 노출되지 않으므로 ABC 클래스의 캡슐화가 유지됩니다.
참고 1: 기본 데이터 유형(int, char 등)의 경우 기본 데이터 유형에는 참조 개념이 없기 때문에 getter 및 setter 메소드에서 복사본을 만들 필요가 없습니다.
참고 2: 문자열 개체 유형도 참조에서 작동합니다. 그러나 위의 예와 달리 외부에 노출된 문자열 참조를 처리할 필요는 없습니다. 문자열은 불변이기 때문입니다. 따라서 기본 메소드(또는 다른 곳)에서 문자열을 조작하면 새 String 객체가 생성되고 이전 객체는 그대로 유지됩니다.
파일 이름: GetterSetterExample6.java
class ABC { private String str = null; // a setter method void setVal(String s) { // reference is getting copied this.str = s; } // for displaying the string void display() { System.out.println( 'The String is: ' + this.str); } } // Main class. public class GetterSetterExample6 { // main method public static void main(String argvs[]) { // creating an object of the class ABC ABC obj = new ABC(); // input string String inputStr = 'Hello India!'; // invoking the setter method obj.setVal(inputStr); obj.display(); // manipulation is not allowed! // it leads to the creation of the new string inputStr = 'Hello World!'; obj.display(); } } 산출:
The String is: Hello India! The String is: Hello India!