때로는 Python 문자열로 작업하는 동안 모든 하위 문자열을 다른 문자열로 바꿔야 하는 문제가 발생할 수 있습니다.
입력 : test_str = geeksforgeeks s1 = 괴짜 s2 = abcd
출력 : test_str = abcdforabcd 설명 : test_str에서 s1의 모든 항목을 s2로 바꿉니다.
입력 : test_str = geeksforgeeks s1 = for s2 = abcd
출력 : test_str = geeksabcdgeeks
접근법 1
python3에 있는 내장 함수 바꾸기를 사용하여 모든 하위 문자열을 바꿀 수 있습니다.
내장 기능을 사용한 구현:-
파이썬3
#Python has inbuilt function replace to replace all occurrences of substring.> input_string>=> 'geeksforgeeks'> s1>=> 'geeks'> s2>=> 'abcd'> input_string>=> input_string.replace(s1, s2)> print>(input_string)> |
>
>산출
자바 람다
abcdforabcd>
시간 복잡도: 에)
보조 공간: 에)
접근법 2:
문자열을 하위 문자열로 분할한 다음 새 string.split() 함수로 바꾸는 것이 사용됩니다.
파이썬3
#code for replacing all occurrences of substring s1 with new string s2> test_str>=>'geeksforgeeks'> s1>=>'geeks'> s2>=>'abcd'> #string split by substring> s>=>test_str.split(s1)> new_str>=>''> for> i>in> s:> >if>(i>=>=>''):> >new_str>+>=>s2> >else>:> >new_str>+>=>i> #printing the replaced string> print>(new_str)> #contributed by Bhavya Koganti> |
>
>산출
abcdforabcd>
모든 방법의 시간 및 공간 복잡도는 동일합니다.
시간 복잡도: 에)
보조 공간: 에)
방법 3: 문자열에서 부분 문자열을 모두 바꾸는 또 다른 방법은 다음을 사용하는 것입니다. re.sub() Python의 re 모듈에 있는 함수입니다.
파이썬3
최대 절전 모드 방언
import> re> def> replace_substring(test_str, s1, s2):> ># Replacing all occurrences of substring s1 with s2> >test_str>=> re.sub(s1, s2, test_str)> >return> test_str> # test> test_str>=> 'geeksforgeeks'> s1>=> 'geeks'> s2>=> 'abcd'> print>(replace_substring(test_str, s1, s2))> |
>
>산출
abcdforabcd>
시간 복잡도: O(n), 여기서 n은 입력 문자열의 길이입니다. 이는 re.sub() 함수가 전체 입력 문자열을 반복하고 각 문자에 대해 정규식 일치를 수행하여 하위 문자열의 모든 항목을 찾기 때문입니다. 반복 횟수는 입력 문자열의 길이에 정비례합니다.
보조공간:신규
방법 4: 단순 반복 사용
이 접근 방식의 기본 아이디어는 입력 문자열을 문자별로 반복하고 길이가 m인 각 하위 문자열이 교체하려는 하위 문자열과 일치하는지 확인하는 것입니다. 그렇다면 교체 하위 문자열을 결과에 추가하고 포인터를 m 문자만큼 앞으로 이동합니다. 일치하지 않으면 현재 문자를 결과에 추가하고 포인터를 한 문자씩 앞으로 이동합니다.
파이썬3
def> replace_substring(test_str, s1, s2):> ># Initialize an empty string to store the result> >result>=> ''> ># Initialize a variable to keep track of our position in the string> >i>=> 0> ># Loop through the string one character at a time> >while> i <>len>(test_str):> ># Check if the current substring matches the substring we want to replace> >if> test_str[i:i>+>len>(s1)]>=>=> s1:> ># If it does, add the replacement substring to the result and move the pointer forward> >result>+>=> s2> >i>+>=> len>(s1)> >else>:> ># If it doesn't, add the current character to the result and move the pointer forward> >result>+>=> test_str[i]> >i>+>=> 1> ># Return the final result> >return> result> # test> test_str>=> 'geeksforgeeks'> s1>=> 'geeks'> s2>=> 'abcd'> print>(replace_substring(test_str, s1, s2))> |
>
>산출
abcdforabcd>
시간 복잡도: O(nm), 여기서 n은 입력 문자열의 길이이고 m은 대체될 하위 문자열의 길이입니다.
보조 공간: O(n), 결과를 저장할 새 문자열을 생성하기 때문입니다.